Inventor 2014 SP1 Update 3

Another cumulative update for Inventor 2014 SP1 i.e. if you don't have Update 1 or 2 yet you can ignore them and go straight to Update 3.  You do need SP1 installed, however.

The download and readme's can be found here:

http://knowledge.autodesk.com/support/inventor-products/downloads/caas/downloads/content/update-3-for-inventor-2014-service-pack-1.html

Vault WG/Pro 2014 update paths

Updating your Vault server and client is always something to plan in advance, especially the server as it will take the Vault offline while it upgrades and then take time to migrate your databases to the latest version.

If you are running Vault Workgroup or Professional and are using, or intend to use the Subscription Release, then the latest service pack offerings from Autodesk should be handled with slightly more care than usual.

The following upgrade path is advised:

Vault > Vault SP1 > Vault Subs1 > Vault Subs1 SP1

You should ignore Vault SP2 completely where the Subs Release is concerned.

If you are not on subscription, or do not want to use the Subs Release, then the standard path of SP1 then SP2 will not be a problem.

A tip is not to launch the ADMS Console until you have applied all updates.  Launching mid-way will require a separate migration for each stage.

S.C.

Factory Design Utilities Service Pack 1

There is an update available for Factory Design Suite 2014's Utilities over on the Autodesk website right now clocking in at a modest 33MB.  Please note that you must install SP1 for Navisworks before installing the utilities service pack.

Autodesk_Factory_Design_Utilities_2014_Service_Pack_1.zip(zip - 32927Kb)

As always, please consult the readme before making any updates to your software

AutoCAD Electrical 2014 Service Pack 1

The first Service Pack for AutoCAD Electrical 2014 is now available for download:


 ACE2014SP1_32bit.exe (exe - 33858Kb)
 ACE2014SP1_64bit.exe (exe - 44248Kb)


Some issues addressed are as follows:

Problems Reported with the Customer Error Reporting Utility

As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. This service pack also includes problems fixed by Autodesk AutoCAD 2014 Service Pack 1. Updates have been made in the following commands and features:

Project Manager

• Occasional crashes while working with Project Manager.

OLE

• Occasional crashes or program hangs when performing copy and paste or plot operations with drawings that contain OLE objects.

General Service Pack Updates

This service pack also includes Autodesk AutoCAD 2014 Service Pack 1. The following defects have been addressed by AutoCAD Electrical 2014 Service Pack 1:

Cross Reference

• Symbol mapping option of the table style cross referencing does not work unless the library is listed first in the Project Properties.

Catalog Lookup

• Catalog data shifts some of the columns when do the Catalog Lookup for some special database.
• Catalog lookup locks up when switch from a table have more columns to a table have less columns.

Insert/Edit Components/Footprints

• Insert Panel from Schematic list may fail in some Localization version.
• DESC1, DESC2 and DESC3 are not copied to multi-pole when insert child poles.

Ladder

• Set Line reference values with sheet number template does not update to match the drawing sheet number during creation of new drawing.

Project Tools

• Project_wide update always save drawings in 2013 format.
• Component Update From Catalog does not work well to update the Weblink and Pinlist.

Tagging

• Fails to recognize duplication of tag when working with multiple drawings.

Terminal Strip Editor

• Cannot sort by all column headers in Terminal Strip Editor.
• Poor performance when editing the Terminal Strip that contains lots of terminals.

Autodesk Mudbox 2014 Service Pack 1

Mudbox 2014 Service Pack 1 addresses quality and stability issues with remeshing (retopology), Multi-Touch interaction, and other fixes across several areas including the Grab tool. For more information and a list of what’s fixed, please refer to the Release Notes.

Installing Autodesk Mudbox 2014 Service Pack 1

• On Windows platforms, this service pack is designed to patch your existing Mudbox 2014 application. Do not uninstall Mudbox before installing this service pack.

3ds Max / 3ds Max Design Service Pack 1 (SP1)

Service Pack 1 for Autodesk® 3ds Max® 2014 / 3ds Max® Design 2014 includes fixes for issues with stability and performance based on customer feedback.

Please select the correct version and readme before installing:

• 3ds Max® 2014 SP1
• 3ds Max® Design 2014 SP1

Fatal Error Applying Service Pack 1 for AutoCAD/LT 2013

You are encountering this issue due to a problem with Service Pack 1 for AutoCAD 2013 and AutoCAD LT 2013. We are actively working on resolving this issue. It is recommended that you uninstall Service Pack 1 until further notice.

Service Pack 1 for AutoCAD Electrical 2012 Released

Service Pack 1 is now available for AutoCAD 2012 and can be downloaded directly from the link below:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=17800098&linkID=9240738
 
This Service Pack resolves a number of issues which are detailed in the ReadMe document along with installation instructions. Please make sure you read this important document before carrying out the service pack installation.

Service Pack 1 is available for 32bit and 64bit installations and is a 12Mb or 16Mb download.

Service Pack 1 for AutoCAD Mechanical 2012 (Part of Inventor Suites) Released

Service Pack 1 is now available for AutoCAD 2012 and can be downloaded directly from the link below:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=17809346&linkID=9240898&CMP=OTC-RSSSUP01
 
This Service Pack resolves a number of issues which are detailed in the ReadMe document along with installation instructions. Please make sure you read this important document before carrying out the service pack installation.

Service Pack 1 is available for 32bit and 64bit installations and is a 17Mb or 26Mb download.

SQL Server 2008 R2 SP1 - Supported with Vault Server 2012?

Microsoft recently published SP1 for Microsoft SQL Server 2008 R2 (Editions Standard, Enterprise, Express).

At this stage SP1 for MS SQL Server 2008 R2 is not supported with Vault Server 2012 until further notice.

Service Pack 1 for AutoCAD 2012 Released

Service Pack 1 is now available for AutoCAD 2012 and can be downloaded directly from the link below:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=17692441&linkID=9240618&CMP=OTC-RSSSUP01

This Service Pack resolves a number of issues which are detailed in the ReadMe document along with installation instructions. Please make sure you read this important document before carrying out the service pack installation.

Service Pack 1 is available for 32bit and 64bit installations and is a 14Mb or 19Mb download.

Service Pack 1 for Inventor 2012 Released

Service Pack 1 is now available for Autodesk Inventor 2012 and can be downloaded directly from the link below:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=17534725&linkID=9242019

This Service Pack resolves a number of issues which are detailed in the ReadMe document along with installation instructions. Please make sure you read this important document before carrying out the service pack installation.

Service Pack 1 is available for 32bit and 64bit installations and is a 31Mb or 61Mb download.

Please note: If you are running Inventor 2012 on an XP 32bit machine, you may come across an issue when installing SP1. The error you may receive is Error 1402, to resolve see below:

• After seeing the error, click OK on the error dialog.
• The installer will fail, then try to reinstall the SP1.
• The problem should not happen again and you should be able to install the SP1.
• If you still have the problem installing the SP1 for the second time, try to install it from the Live Update.

Autodesk Inventor 2011 Service Pack 1 is Released

Applies to:

• AutoCAD Inventor Professional Suite 2011
• AutoCAD Inventor Routed Systems Suite 2011
• AutoCAD Inventor Simulation Suite 2011
• AutoCAD Inventor Suite 2011
• AutoCAD Inventor Tooling Suite 2011

Download from:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15506670&linkID=9242019

Details:

Autodesk Inventor 2010 Service Pack 1 is an incremental update.

You must install Autodesk Inventor 2011 before you can install Autodesk Inventor 2011 Service Pack 1. This service pack updates AutoCAD Inventor Suite 2011, AutoCAD Inventor Routed Systems Suite 2011, AutoCAD Inventor Simulation Suite 2011, AutoCAD Inventor Tooling Suite 2011 and AutoCAD Inventor Professional 2011 for all languages.

Autodesk Data Management Server 2011 SP1

Applies to:

• Autodesk Vault 2011
• Autodesk Vault Collaboration 2011
• Autodesk Vault Professional 2011
• Autodesk Vault Workgroup 2011

Download from:

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=15092560&linkID=9261341

Details:

In a continuing effort to provide high quality products, Autodesk has released Autodesk Vault 2011 Update 1 (Client) and Autodesk Vault 2011 Update 1 (Server) for Autodesk Vault 2011, Autodesk Vault Workgroup 2011, Autodesk Vault Collaboration 2011, and Autodesk Vault Professional 2011 which fixes or addresses a variety of issues pertaining to those releases.

WARNING: Failure to follow the ReadMe instructions properly may result in unusable sites. The installation procedure applies to Single Site, Multi Site and Connected Workgroup deployments.

NOTE: Always ensure that a successful backup has been performed before applying any hotfix or update.

This Update should be installed in conjunction with Inventor 2011 hotfix TS1110607.